SẢN PHẨM

TÌM KIẾM

  • Từ khóa
  • Danh mục

SẢN PHẨM MỚI

TIN TỨC

THỐNG KÊ

  • Khách đang online: 11
  • Truy cập hôm nay: 148
  • Lượt truy cập: 811091
  • Số trang xem: 921727
  • Tổng số danh mục: 24
  • Tổng số sản phẩm: 105

QUẢNG CÁO

Bạn đang ở: Trang chủ » Danh mục » CÁCH LY TÍN HIỆU » Bộ khuếch đại cách ly DN25000

Dùng cuộn chuột thay đổi chế động phóng to ảnh

Click để xem ảnh lớn !

Bộ khuếch đại cách ly DN25000

Mã SP: DN 25000

Giá bán: liên hệ

Tình trạng: Còn hàng

Bảo hành: 24 tháng

Số lượng:

Chia sẻ sản phẩm trên mạng xã hội:


CTY ÂU MỸ LÀ ĐẠI LÝ HÃNG DRAGO TẠI VIỆT NAM

BỘ KHUẾCH ĐẠI CÁCH LY DN25000.

CÁCH LY VÀ KHUẾCH ĐẠI CHO TÍN HIỆU 4...20mA, 0-10V THAY THẾ CHO BỘ CÁCH LY WEIDMULLER, BỘ CÁCH LY M-SYSTEM, BỘ CÁCH LY INOR, BỘ CÁCH LY SENECA, BỘ CÁCH LY PHOENIX CONTACT, BỘ CÁCH LY MTL, BỘ CÁCH LY TURCK, BỘ CÁCH LY STAFF...

HÀNG NHẬP KHẨU TỪ ĐỨC, CHẤT LƯỢNG CAO GERMANY

THÔNG SỐ KỸ THUẬT BỘ CÁCH LY DN25000:

Technical Data

Input

Input signal
(calibrated switchable)		 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V
Input resistance Current input
Voltage input		 ≤ 25 Ohm
≥ 100 kOhm
Overload Current input
Voltage input		 < 50 mA
< 30 V

Output

Output signal
(calibrated switchable)		 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V
Load Current output
Voltage output		 ≤ 12 V (600 Ohm at 20 mA)
≤ 5 mA (2 kOhm at 10 V)
Linear transmission range –1 to +110 %
Ripple < 10 mVrms

General Data

Transmission error < 0.1 % full scale
Temperature coefficient 1) < 100 ppm/K
Cut-off frequency -3 dB
(switchable)		 5 kHz, 100 Hz, 10 Hz
Response time T99 150 µs, 7 ms, 70 ms
Test voltage 3 kV AC, 50 Hz, 1 min, Input against output against power supply
Working voltage 2)
(Basic Insulation)		 Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits.
Protection against electrical shock 2) Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
Ambient temperature Operation
Transport and storage		 –25 °C to +70 °C   (-13 to +158 °F)
–40 °C to +85 °C   (-40 to +185 °F)
Power supply 24 V DC      16.8 V to 31.2 V, approx. 0.7 W
EMC 3) EN 61326-1
Construction 6.2 mm housing, protection class: IP 20
Weight Approx. 70 g
  1. Average TC based on the final value in specified operating temperature range
  2. As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
  3. Minor deviations possible during interference

Block diagram

Dn25000

Dimensions

Masszeichnung-mitBus

Connection
Captive plus-minus clamp screws
Wire cross-section max. 2.5 mm² / AWG 14
Stripped length 6 to 8 mm / 0.28 in
Screw terminal torque 0.8 Nm / 7 lbf in
Optional power connection via In-Rail-Bus (see accessories)

Terminal assignments

1 + Input current
2 - Input current
3 + Input voltage
4 - Input voltage
     
5 + Output
6 - Output
     
7 + Power supply (connected to In-Rail-Bus)
8 - Power supply (connected to In-Rail-Bus)
Dn 25000

Liên hệ để được tư vấn:

Long Tran

Mob.: +84 909 006 435

Email.: long.tran@aumyco.com

AU MY technology Service Trading Company limited

Add.: 93/36 Street 02, Tam Binh Ward, Thu Duc District, Ho Chi Minh city, Vietnam

Tel.: +84 3 816 2902      Fax: +84 3 816 2902

Web.:    www.aumyco.com          Email.: info@aumyco.com          

www.tbcongnghiep.com             

www.chuyendoitinhieu.com     

www.doluongcongnghiep.com

CTY ÂU MỸ LÀ ĐẠI LÝ HÃNG DRAGO TẠI VIỆT NAM BỘ KHUẾCH ĐẠI CÁCH LY DN25000. CÁCH LY VÀ KHUẾCH ĐẠI CHO TÍN HIỆU 4...20mA, 0-10V THAY THẾ CHO BỘ CÁCH LY WEIDMULLER, BỘ CÁCH LY M-SYSTEM, BỘ CÁCH LY INOR, BỘ CÁCH LY SENECA, BỘ CÁCH LY PHOENIX CONTACT, BỘ CÁCH LY MTL, BỘ CÁCH LY TURCK, BỘ CÁCH LY STAFF... HÀNG NHẬP KHẨU TỪ ĐỨC, CHẤT LƯỢNG CAO GERMANY THÔNG SỐ KỸ THUẬT BỘ CÁCH LY DN25000: Technical Data Input Input signal (calibrated switchable) 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V Input resistance Current input Voltage input ≤ 25 Ohm ≥ 100 kOhm Overload Current input Voltage input < 50 mA < 30 V Output Output signal (calibrated switchable) 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V Load Current output Voltage output ≤ 12 V (600 Ohm at 20 mA) ≤ 5 mA (2 kOhm at 10 V) Linear transmission range –1 to +110 % Ripple < 10 mVrms General Data Transmission error < 0.1 % full scale Temperature coefficient 1) < 100 ppm/K Cut-off frequency -3 dB (switchable) 5 kHz, 100 Hz, 10 Hz Response time T99 150 µs, 7 ms, 70 ms Test voltage 3 kV AC, 50 Hz, 1 min, Input against output against power supply Working voltage 2) (Basic Insulation) Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits. Protection against electrical shock 2) Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits. Ambient temperature Operation Transport and storage –25 °C to +70 °C (-13 to +158 °F) –40 °C to +85 °C (-40 to +185 °F) Power supply 24 V DC 16.8 V to 31.2 V, approx. 0.7 W EMC 3) EN 61326-1 Construction 6.2 mm housing, protection class: IP 20 Weight Approx. 70 g Average TC based on the final value in specified operating temperature range As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices. Minor deviations possible during interference Block diagram Dn25000 Dimensions Masszeichnung-mitBus Connection Captive plus-minus clamp screws Wire cross-section max. 2.5 mm² / AWG 14 Stripped length 6 to 8 mm / 0.28 in Screw terminal torque 0.8 Nm / 7 lbf in Optional power connection via In-Rail-Bus (see accessories) Terminal assignments 1 + Input current 2 - Input current 3 + Input voltage 4 - Input voltage 5 + Output 6 - Output 7 + Power supply (connected to In-Rail-Bus) 8 - Power supply (connected to In-Rail-Bus) Liên hệ để được tư vấn: Long Tran Mob.: +84 909 006 435 Email.: long.tran@aumyco.com AU MY technology Service Trading Company limited Add.: 93/36 Street 02, Tam Binh Ward, Thu Duc District, Ho Chi Minh city, Vietnam Tel.: +84 3 816 2902 Fax: +84 3 816 2902 Web.: www.aumyco.com Email.: info@aumyco.com www.tbcongnghiep.com www.chuyendoitinhieu.com www.doluongcongnghiep.com
  • CTY ÂU MỸ LÀ ĐẠI LÝ HÃNG DRAGO TẠI VIỆT NAM
  • BỘ KHUẾCH ĐẠI CÁCH LY DN25000.
  • CÁCH LY VÀ KHUẾCH ĐẠI CHO TÍN HIỆU 4...20mA, 0-10V THAY THẾ CHO BỘ CÁCH LY WEIDMULLER, BỘ CÁCH LY M-SYSTEM, BỘ CÁCH LY INOR, BỘ CÁCH LY SENECA, BỘ CÁCH LY PHOENIX CONTACT, BỘ CÁCH LY MTL, BỘ CÁCH LY TURCK, BỘ CÁCH LY STAFF...
  • HÀNG NHẬP KHẨU TỪ ĐỨC, CHẤT LƯỢNG CAO GERMANY
  • THÔNG SỐ KỸ THUẬT BỘ CÁCH LY DN25000:
  • Technical Data
  • Input
  • Input signal
  • (calibrated switchable) 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V
  • Input resistance Current input
  • Voltage input ≤ 25 Ohm
  • ≥ 100 kOhm
  • Overload Current input
  • Voltage input < 50 mA
  • < 30 V
  • Output
  • Output signal
  • (calibrated switchable) 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V
  • Load Current output
  • Voltage output ≤ 12 V (600 Ohm at 20 mA)
  • ≤ 5 mA (2 kOhm at 10 V)
  • Linear transmission range –1 to +110 %
  • Ripple < 10 mVrms
  • General Data
  • Transmission error < 0.1 % full scale
  • Temperature coefficient 1) < 100 ppm/K
  • Cut-off frequency -3 dB
  • (switchable) 5 kHz, 100 Hz, 10 Hz
  • Response time T99 150 µs, 7 ms, 70 ms
  • Test voltage 3 kV AC, 50 Hz, 1 min, Input against output against power supply
  • Working voltage 2)
  • (Basic Insulation) Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits.
  • Protection against electrical shock 2) Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
  • Ambient temperature Operation
  • Transport and storage –25 °C to +70 °C (-13 to +158 °F)
  • –40 °C to +85 °C (-40 to +185 °F)
  • Power supply 24 V DC 16.8 V to 31.2 V, approx. 0.7 W
  • EMC 3) EN 61326-1
  • Construction 6.2 mm housing, protection class: IP 20
  • Weight Approx. 70 g
  • Average TC based on the final value in specified operating temperature range
  • As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
  • Minor deviations possible during interference
  • Block diagram
  • Dn25000
  • Dimensions
  • Masszeichnung-mitBus
  • Connection
  • Captive plus-minus clamp screws
  • Wire cross-section max. 2.5 mm² / AWG 14
  • Stripped length 6 to 8 mm / 0.28 in
  • Screw terminal torque 0.8 Nm / 7 lbf in
  • Optional power connection via In-Rail-Bus (see accessories)
  • Terminal assignments
  • 1 + Input current
  • 2 - Input current
  • 3 + Input voltage
  • 4 - Input voltage
  • 5 + Output
  • 6 - Output
  • 7 + Power supply (connected to In-Rail-Bus)
  • 8 - Power supply (connected to In-Rail-Bus)
  • Liên hệ để được tư vấn:
  • Long Tran
  • Mob.: +84 909 006 435
  • Email.: long.tran@aumyco.com
  • AU MY technology Service Trading Company limited
  • Add.: 93/36 Street 02, Tam Binh Ward, Thu Duc District, Ho Chi Minh city, Vietnam
  • Tel.: +84 3 816 2902 Fax: +84 3 816 2902
  • Web.: www.aumyco.com Email.: info@aumyco.com
  • www.tbcongnghiep.com
  • www.chuyendoitinhieu.com
  • www.doluongcongnghiep.com

BÌNH LUẬN


Có 0 bình luận về "Bộ khuếch đại cách ly DN25000"

+ Viết bình luận

GỬI BÌNH LUẬN HOẶC CÂU HỎI CỦA BẠN

Bình luận hay có ý kiến đóng góp. Vui lòng điền vào form bên dưới và gửi cho chúng tôi.

Email:

Nội dung:

Tôi muốn nhận câu trả lời về câu hỏi này qua email


SẢN PHẨM LIÊN QUAN

BỘ CÁCH LY TÍN HIỆU DH18

liên hệ

 

Chọn mua

Bộ khuếch đại tín hiệu 4...20mA DC58

liên hệ

 

Chọn mua

BỘ CÁCH LY TÍN HIỆU DH18

Giá bán: liên hệ

Tình trạng:
Hiện có: 0 bình luận

Bộ khuếch đại tín hiệu 4...20mA DC58

Giá bán: liên hệ

Tình trạng:
Hiện có: 0 bình luận